GYTR Turbo Kit for YXZ1000
This kit includes a complete new ECU that can read boost pressure with a map sensor like a factory turbo car should. This is why most other companies selling turbo kits use piggy back controllers to alter the ECU as they couldn't make a new ECU like Yamaha has done. Yamaha's solution is much much better and much more refined and offers much better drivability as well as engine protection. The intercooler included with this kit is air to water. Most other kits are air to air as it is cheaper and a bit simpler. The air to water is a better solution as water cools much better than air and keeps your intake temps much more consistent. Air to water also gives faster spool times due to shorter charge pipes and no big volume intercooler needed to fill to build pressure every time you get on and off the throttle. This kit includes everything you need and is OEM quality ensuring a good fit. Down the road if you decide you want more build your engine add a simple ECU re-flash and make over 300hp. There are cheaper kits out there but for the little you save it isn't worth it as they simply cannot compare.
-Upgrade-able to 350hp with injectors a Alba Racing re-flash.
-Genuine Garrett ball bearing GT2860rs turbocharger.
-GYTR ECU with real map based table and map sensor.
-Air to water intercooler setup.
-Tig welded short turbo manifold.
-Tig welded Aluminum intake manifold.
-Oversize Donaldson airbox assembly.
-Braided stainless steel lines and an fittings.
-High quality silicone couplers and clamps.
Does NOT include GYTR RODS or gasket.
ECU FLASH Options
No Re-Flash: No Alba ECU Re-flash included. This is just how the kit comes from GYTR.
Alba Stage Options:
Stage 1: This flash de-restricts the GYTR ECU giving you full RPM in 5th gear, no speed limiter, and lowered fan activation temp +399$
Stage 2: This flash is for a stock engine, stock injectors w/ Aftermarket exhaust. This will make 200HP and includes all the benefits listed in STG1 +399$ (
Stage 3: This flash includes 1000cc Injectors +569$, +399$ ECU (requires built engine) and will make up to 300hp
Stage 4: This flash includes 1000cc injectors, regulator, pump, wastegate. Up to 350hp. Coming soon
Stage 5: This flash includes 1000cc injectors, regulator, pump, wastegate, Alba Cams Up to 370hp. Coming soon
**Read below for more info about the different stages.**
2016-2018 Kits REQUIRE MODIFICATION. 2016-2018 GYTR KITS NO LONGER AVAILABLE 2019-2020 REQUIRE MODIFICATION TO WORK WITH 2016-2018 MODELS
Call 619-562-0188 for details
**No other discounts can be applied to this item. We sell this at bottom dollar**
-Stage 1 Designed for a stock engine and stock injectors. This flash will allow you to turn your stock boost up to 8 psi from 6. This is the maximum you can run on the stock injectors as they are running at 100% duty cycle.
-Stage 2 Designed for a stock engine and stock injectors with an open exhaust. A YXZ 1000 with a GYTR kit will run much better with an open exhaust. Your turbo will also spool quicker and the car will just be more fun to drive. Due to the large hp increase we do need to alter the flash accordingly.
-Stage 3 Designed for a built engine with open exhaust and our 1000cc injectors. With this kit you can run up to 18 pounds of boost. You can add a boost controller and adjust your boost on the fly as needed. You will need race fuel for over 12 psi. You must have exhaust for this kit (our SBD tip or a slip on) and a BUILT MOTOR (Pistons, Rods, Valve Springs, Tensioner, Head Studs)
-Stage 4 Same as stage 4 with added fuel pressure regulator with return line setup, Larger fuel pump, billet fuel pump bracket, lines and fittings. With this kit you can run up to 20 psi. This kit is being tested now and will be available shortly.
-Stage 5 Same as stage 5 with added camshafts. This cams will add about 20hp from mid to top end with no loss in bottom end. This kit is being tested now and will be available shortly
WARNING: California Residents, this item is subject to Proposition 65 regulations for cancer and reproductive harm.
- Item Requires Shipping
- 85.0 lbs.
- W30.0000” x H12.0000” x L30.0000”
- Free standard shipping We will select the shipping method.
- EST Shipping 7-10 business days
Total Reviews (1)
Reviewed by: Richard04/22/2021 01:31PM
Product ownership: Less than 3 months
Purchased from: Team Alba Racing
Very pleased with this upgrade. The guys at Alba delivered when I could not find this kit anywhere else. The slip on and tune were well worth the money, everything was included, good instructions. Thanks
You must login to post a review.
May We Suggest
- Team Alba Racing Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Shipping See our shipping terms
- No Hassle ReturnsSee our return policy