Extended +2 A-arms Raptor 660
Fitment: These fit all years Yamaha Raptor 660
-Plus 4" wider (2" on each side)
-Made from 4130 chromoly steel
-Camber adjustable, Caster adjustable to match your riding style, toe in adjustable
-New Delrin bushings are included and pre installed
-Zerk fittings included to make it easy to grease the bushings
-This kit uses your stock steel bushings and your stock dust caps
-Tie rods are made from stainless steel
-Powdercoated matte black - this is the only color we offer
-Upper and Lower ball joints are included - NO spindle reaming required!
-Made for STOCK length shocks - O.E.M. or aftermarket (O.E.M. re-valving recommended)
-1 year warranty. This does not cover crashes.
-See below for more info.
**Optional stainless brake lines.
**Optional brake line clamps. (Not for stock lines)
WARNING: California Residents, this item is subject to Proposition 65 regulations for cancer and reproductive harm.
- Item Requires Shipping
- 10.0 lbs.
- W15.0000” x H8.0000” x L15.0000”
- Free standard shipping We will select the shipping method.
Total Reviews (1)
Reviewed by: Tyler01/18/2019 05:11AM
Product ownership: A year or longer
Purchased from: Team Alba Racing
After a wreck on my bike that ended up destroying one of the front left a-arms, I originally thought I'd just buy a stocker and get up and going again asap. One of the major problems with the raptor 660 is that it has a really high center of gravity, so I started looking around for something to widen the stance, and came across these. They installed without any hick-ups, and the tires were easy enough to aline using a couple 2x4s clamped to the front tires, a tape measure, and a friend. There was even a note describing how to do the process properly. I rode them around for a good 20ish hours without any faults. That was until right after an hour and a half ride where right before I got home, one of the tie rods for the steering stripped and fell off. Scary shit right there let me tell you. I do not believe that I cross threaded it when installing because I was able to adjust it without too much force. I emailed AlbaRacing later that week, and by the next day they sent out a new set, free of charge that arrived in a couple days. All in all I would highly recommend buying a set of these as they improve the handling and the center of gravity dramatically.
As a side note- You will need to stiffen your front shocks, the factory setting will bottom out easily otherwise.
You must login to post a review.
May We Suggest
- Team Alba Racing Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Shipping See our shipping terms
- No Hassle ReturnsSee our return policy