Additional Images
Polaris RZR "Turbo" Rebuild
550-Turbo-Rebuild
2016-2020 Polaris RZR Turbo "Turbo" Rebuild (DOES NOT WORK FOR "PRO")
Time for a refresh on your stock turbo? Send it in for a rebuild!
Features:
-New Shaft Bearings
-New Piston Rings/Seals both Compressor and Turbine side
-New Thrust Collar and Plate
-New Seals
-Housings are chemically cleaned then blasted with Aluminum Oxide
-Wheel and shaft precision balanced
It is necessary to rebuild your turbo before shaft deflection causes the wheel to walk into the housing. If the wheel walks into the housing the turbo needs to be replaced. It is always best to stay ahead of maintenance! Please remove the actuator and inspect the actuator door for cracks, very common issue with RZR turbos. We will not be able to rebuild it if the housing is damaged/cracked.
Many turbos we have sent in are not re-buildable unfortunately. If the housing has any cracks it is not re-buildable. Remove your wastegate actuator, and inspect behind the flapper door. (Also make sure the flapper does not have excessive lateral play) Typically behind the flapper is where we see the majority of cracks, but some can not be seen until the housing is broke down, cleaned and media blasted. If your Turbo is not re-buildable a $50 service charge for the disassembly and cleaning will be kept out of the refund. If the turbo is re-buildable the $50 is waved and included in your re-build.
New Stock CHRA (Cartridge) and Housing Options
Time for a refresh on your stock turbo? Send it in for a rebuild!
Features:
-New Shaft Bearings
-New Piston Rings/Seals both Compressor and Turbine side
-New Thrust Collar and Plate
-New Seals
-Housings are chemically cleaned then blasted with Aluminum Oxide
-Wheel and shaft precision balanced
It is necessary to rebuild your turbo before shaft deflection causes the wheel to walk into the housing. If the wheel walks into the housing the turbo needs to be replaced. It is always best to stay ahead of maintenance! Please remove the actuator and inspect the actuator door for cracks, very common issue with RZR turbos. We will not be able to rebuild it if the housing is damaged/cracked.
Many turbos we have sent in are not re-buildable unfortunately. If the housing has any cracks it is not re-buildable. Remove your wastegate actuator, and inspect behind the flapper door. (Also make sure the flapper does not have excessive lateral play) Typically behind the flapper is where we see the majority of cracks, but some can not be seen until the housing is broke down, cleaned and media blasted. If your Turbo is not re-buildable a $50 service charge for the disassembly and cleaning will be kept out of the refund. If the turbo is re-buildable the $50 is waved and included in your re-build.
New Stock CHRA (Cartridge) and Housing Options
Description
What we do: (You need to ship us your turbo so we can perform the following).
-Dissembly of your turbo and clean parts.
-Rebuild turbo with new Bearings,Plates,Collars and Seals.
-Balance turbo.
-Return to customer. (process takes about 1-2 weeks)
Shipping: (You pay shipping to us and we pay shipping back to you)
-You must ship your turbo to us at the address below. Please include a copy of your order.
Alba Racing
10809 prospect ave
Santee CA 92071
-Once we receive your turbo we need it for about 1-2 weeks. Once finished we will ship it back to you.
WARNING: California Residents, this item is subject to Proposition 65 regulations for cancer and reproductive harm.
Shipping Information
- Item Requires Shipping
- 15.0 lbs.
- W15.0000” x H15.0000” x L15.0000”
- Free standard shipping We will select the shipping method.
- Team Alba Racing Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Shipping See our shipping terms
- No Hassle ReturnsSee our return policy
- Have a question? Ask the Pros
- Email UsGet answers from the pros
- 619-562-0188Mon - Fri 7:00 - 4:00 PM PST