Alba Racing Baja Crusher Billet Beadlock Wheels
-Hand built and designed to your specs. Make it yours.
-Fully Serviceable (This is a True 3 Piece Wheel)
-Heavy duty 3/8" thick billet 6061-T6 CNC Bead Lock Ring.
-Heavy duty 3/8" thick billet 6061-T6 CNC Bead lock Ring Receiver.
-Oversized 8mm Grade 8 Bead Lock Bolts.
-.200" 6061-T6 aluminum heat treated inner and outer halves.
-.600" thick 6061-T6 billet CNC center.
-Built tough yet still lighter than most cast wheels.
-Extremely durable Heat Treated 6061 Aluminum.
-Rolled inner lip for extra strength.
-Powder coated black with your choice of ring color.
Includes: (sold each) If you need 4 wheels buy 4.
-Beadlock ring your choice of color.
-Grade 8 beadlock ring hardware.
Easy Tire Mounting - Can be done in your garage
The color you receive is the color in the picture
Warrantied for manufacturing defects for 6 months
Beadlock ring color:
This is the color that the beadlock ring is painted. We have some standard colors as well as we can do any color you like. Our powdercoat is sourced from Prizmatic powders. This is the highest quality powder available. If you are looking for custom colors visit there website www.prismaticpowders.com. They offer free samples. Once we paint your wheels it can not be undone so make sure you get the color you want. Please order a sample as many times how the color is displayed on your screen differs from real life. There are no refunds on custom painted wheels.
Beadlock ring CNC finish:
After the beadlock ring is powdercoated we can then re mount it to the CNC and re machine the edges of the cutouts. See the picture.
Wheel center color:
This is the color we powdercoat the CNC wheel center. We have some standard colors as well as we can do any color you like. Our powdercoat is sourced from Prizmatic powders. This is the highest quality powder available. If you are looking for custom colors visit there website www.prismaticpowders.com. They offer free samples. Once we paint your wheels it can not be undone so make sure you get the color you want. Please order a sample as many times how the color is displayed on your screen differs from real life. There are no refunds on custom painted wheels.
Wheel center CNC finish:
After the wheel center is powdercoated we can then re mount it to the CNC and re machine the edges of the cutouts. See the picture.
15x7 = 17LBS
15x10 = 19LBS
14x7 = 15LBS
14x10 = 16.5LBS
Polaris RZR XP1000
Polaris RZR Turbo
Can-Am Maverick X3
Can-Am Maverick XDS
Can-Am Maverick 1000
- Item Requires Shipping
- 15.0 lbs.
- W15.0000” x H15.0000” x L15.0000”
Total Reviews (2)
Reviewed by: Rick05/21/2017 08:15AM
Product ownership: Less than 1 week
Purchased from: Team Alba Racing
I recently received my set of Baja Rock Crusher wheels, and the machine work on them appears to be very high quality. I was a bit surprised the powder coating on the area of the beadlock that touches the tire bead wasn't masked off prior to painting, since the paint fills in most of the machine swirls that give it grip. I doubt this will be an issue, but I'm surprised they didn't mask the area, or machine after painting. That was the only issue I could come up with.
I can't wait to put these to the test, because they look outstanding, and appear to be a very high quality item. I didn't see on the website that they use the stock lug nuts, or that they have steel inserts for the beadlock bolts, but they do! I'm confident these will perform as good as the OMFs I have on my other RZR, but for a substantial cost savings!
Reviewed by: Rick06/09/2017 06:49PM
Product ownership: Less than 1 month
Purchased from: Team Alba Racing
It doesnt say in the instructions, but when you put the rings on, align the deeper part of the inside scallop of the ring, so it's easier to get a tire chuck on the valve stem. You can still inflate them if you don't do this, but it's easier if you do.
When I went to install my wheels, they wouldn't slide over the studs because of the powder paint inside the stud holes. I used a drill bit that barely scraped the paint from the inside of the holes.
I have now been in the Oregon dunes riding as hard as I can, and I've had ZERO ISSUES with them. They are holding up well, and work FANTASTIC! The powder is durable, and the wheels look great. My riding friends are going to order some when we get home.
I still highly recommend them, and consider them a great value!
You must login to post a review.
May We Suggest
- Team Alba Racing Difference
- We're the ExpertsAsk us anything. We are the professionals!
- Largest SelectionIf you don't find the part, we'll get it for you!
- Shipping See our shipping terms
- No Hassle ReturnsSee our return policy